Why African Metallurgy Is Important History Essay

Why African Metallurgy Is Important History Essay Metallurgy is the study of metalworking from all of its aspects. In other words, it is the art of working metals (Darvill 2008, 278). Geologically, Africa is known for its promising supplies of metals. Various kinds of metals, such as copper, iron, gold, tin, uranium, manganese, cobalt, bauxite, and the likes are found almost everywhere throughout the African continent in many different settings geographically (Holl 2000,1). Generally, the study of African metallurgy is important as metalworking has brought about the greatest significance that some of the African continents have ever experienced in terms of their cultural and social development. African metallurgy was said to have later given life to the Industrial Revolution around 1,500 to 2,000 years ago when the Africans living on the Western shores of Lake Victoria, in Tanzania, produced carbon steel (http://www.africaresource.com/rasta/sesostris-the-great-the-egyptian-hercules/african-metallurgy-by-nordine-aka-storm/). In the past, some of the metals in Africa were exploited which then resulted in the rise of some of the most impressive indigenous African states, while others have been utilized only recently, as participants in the modernization and industrialization of a handful of countries at the southern end of the continent (Holl 2000, 1). An example of exploitation in metals found during the pre-colonial times in Africa can be seen in the Shaba province of the Congo where copper belt was intensively worked, and also in the adjacent district of Zambia, along with the gold fields of South Africa and Zimbabwe (Holl 2000, 1). In eastern Cameroon and the western Centr al African Republic as well as in the Poura region in Burkina-Faso (Kiethega 1983), traditional gold mining was carried out. On the Bauchi plateau, tin mining was set up. Eventually, the renowned Nok Culture was discovered as a result of the reopening of these mines (Holl 2000, 1). During the periods of Pharaonic, Kushite and later, exploitations were seen at the gold mines from the Red Sea hills and Nubia. In the west at Bure, Galam, Sanakalan, and Bambuk, the gold mines were the key to prosperity of the Ghana and Mali kings. The rise of the Zambezian states in the early second millennium A.D was the result of the early gold mining and trade as well as the changing patterns of production in Zimbabwe (Holl 2000, 1). Both iron and copper working provided a more widespread evidence of African metallurgy. These particular types of metalworking is suggested to be found almost everywhere in the western, central, eastern and southern parts of the continents. Archaeological, historical and ethno-historical information all suggest that the exploitation of these metals was an integral part of the fabric of African societies in the past (Holl 2000, 1-2). Archaeological investigations was carried out throughout inter-tropical Africa over the past three decades and it has resulted in the unearthing of a varied and extensive evidence of early iron production (Holl 2000, 2). The introduction of iron working was said to be an important turning point in Old World history, and this applies specifically in sub-Saharan Africa (Barros 2000, 147). The reason for this was because, in sub-Saharan Africa, iron working (as well as copper working) technology or tools obtained through trade (Miller and van der Merwe 1994, 1) had brought many stone-using cultures directly into the Metal Age (Barros 2000, 147). As scholars have suggested, this had led to the increase in food production through more efficient bush clearance, weeding and harvesting, causing higher population densities; larger and more stable village communities; increased specialization, trade, and social differentiation; and the appearance of a settlement hierarchy and more complex forms of political organization (Barros 2000, 147). The origins of African iron metallurgy have always been an issue that is often a dispute amongst archaeologists. It was known that the vast scale of the African continents as well as the barriers in the politics and cultures had aroused difficulties in the findings of a good evidence database to dissolve the dispute. Iron was believed to have been the first metal to appear in the archaeological records (Childs and Killick 1993, 320). Radiocarbon dates has shown that the iron smelting furnaces dated to the interval 500-1000 cal. BC in Nigeria, Niger, Tanzania and Rwanda (Childs and Killick 1993, 320). However, these dates were known to have created a further debate on the origins of African ironworking. A few oppositional voices had argued that ironworking has been invented independently in sub-Saharan Africa (Andah 1979; Schmidt and Avery 1983) (Childs et al. 2005, 278). It might be possible as the process had originated from the smelting methods which are already in used in Africa to make copper. Iron oxides were said to have been used as a soldering aid in the process of smelting copper and with some experimentation, the process then accidentally resulted in iron production, which then developed into iron smelting. In some regions, copper was found to have been smelted first but evidence of it appears to be relatively low, where only the remaining slag was found. This may be due to the inefficient methods of production. Some archaeologists had argued that the iron working techniques might have been brought by the surrounding countries into the continent through diffusion (Okafor 1993, 432). The routes used for this process was suggested to be either running south to west from Meroe on the Nubian Isle (Childs et al. 2005, 278). There are also some which was believed to have come from Egypt and then the methods scattered from the north to the sub-Saharan Africa. Iron production took quite a period of time to spread due to the massive size of the African continent which has an extreme geographical context. This resulted in the suggestions that iron had a various place of birth. The wide distribution of iron ores geologically had meant that the raw materials were readily available resulting in great potential for multiple origins of production. Archaeological evidence, including production methods used in present Africa, it seemed unlikely that the traditions and techniques could be so diversified for i t has all began from one place and one technique (Holl 2000, 9). An example can be seen from a site called the Termit Mountains, in eastern Niger. Copper and iron artefacts were found and they dated back to as far as ca. 1500 BC and the smelting furnaces dated to ca. 800 BC (Childs et al. 2005, 278). There is still an ongoing debate on whether these evidences had suggested that the community had imported these objects before producing it themselves, or, it was simply because the earlier furnaces did not survive the archaeological record instead the artefacts did (Childs et al. 2005, 278). It is also important to bring into consideration that iron working techniques were kept closely guarded secrets as this factor may influence the period it took for the Africans to be able to require the technique. Iron artefacts found in the field are often the basic evidence of iron production in the archaeological records. These artefacts are often in a corroded condition and at times could be unidentifiable. It is often unreliable to base the origin of the context to that of the artefact as where it has been made might be completely different from where it was made, a possibility that it might be imported. Concrete evidence which are often found for iron production are the used bowl of furnaces, and tuyeres and slag from the furnace or forging processes. Bloom and bellows are rare finds. Traces of mining and beneficiation of iron ore can also be used as archaeological evidence. However, these evidence could only be used if after the beneficiation, the ore has proceed to the next production level; and mining evidence are often lost as a result of recent iron ore mining. Slag analysis and radiocarbon dating the charcoal which were used to fire up the furnace was used for dating. Metallography and petrographic analysis are carried out on slag and charcoal samples in order to help understand the processes within the furnace (Kense and Okoro 1993, 449-450). Reconstruction of the iron smelting technology has been made by archaeologists as part of an important process in understanding the running of the ancient technology and to stimulate confidence that their impression of the methods used are correct. Apart from iron, copper and brass were the other metals which were widely utilized in Africa. The more widespread of iron over both copper and brass must have meant that iron had more favourable properties for different uses. The durability of iron over copper had meant that it was used to make various tools for farming pieces to weaponry. It was also used for enhancement in jewelleries, instruments and impressive pieces of artwork. Coins and currencies of multiple forms were made out of iron, such as the Kisi pennies, a traditional form of iron currency used in West Africa for trading. Kisi pennies are twisted iron rods which range from 30cm to 2m in length. They are suggested to be used in various forms of either marital transactions or simply conveniently shaped for transportation, melting down and reshaping it into another desired object. Africa has many different kinds of iron currencies, often regionally with varying shapes and values. In terms of quantity of use and production , iron had achieved a significantly high figure by comparison to other metals, but, it did not replace other materials such as stone and wooden tools. Figure 1 shows a 20th century iron West African Kisi Penny excavated from Kenema, Sierra Leone (Source: http://www.bmagic.org.uk/objects/1995C107) Iron production was recognized as having a great influence over Africa in great regional variation both culturally in trade and expansion, and socially in beliefs and rituals. Evidence for the cultural significance can be seen today as it is still carried out by the present varying African cultures. Ethnographical information has been most useful in the reconstruction of the past events surrounding iron production, but these reconstructions maybe become altered overtime and further influenced by anthropology. In Africa, the Iron Age was mainly based around the agricultural revolution which was driven by the use of iron tools. These iron tools had resulted in high efficient productions on a much larger scales. Fishing hooks, arrow heads and spears were used for hunting. Iron weapons also post effects on warfare. The productions of these items in line with the other iron goods had helped in stimulating economic activities, and led to the rise of both chiefdoms and states. The processes of producing iron were often controlled by the ironworkers personally, or a central power in larger societies such as states or kingdoms (Barros 2000, 154). Individuals in some societies had resulted as smelters or smiths, who specialize in just one particular skill from the many necessary to the production processes as a result of the demands for iron trade. This may also be possible to have resulted in some tradesmen specializing in iron transportation and trade (Barros 2000, 152). However, the iron product ion industries did not benefited every African region as some have suffered from environmental problems due to the massive deforestation needed for supplying charcoal for fuelling the smelting furnaces (Muhammed 1993, 466). An example of this can be seen from the ecological crisis of the Mema Region (Holl 2000, 48). Different social status distributes amongst iron smelters and smiths depending on their culture (Radimilahy 1993, 478-483). Some were having low status in the society as a result of the aspects of manual labour and associations with witchcrafts. These can be seen in the Maasai and Tuareg (Childs et al. 2005, 288). Whereas in other cultures, the skills are often hierarchical in the families and these individuals often held higher social status in the community. The communities often depended on these produced materials due to their powerful knowledge of iron working. They were believed to have strong supernatural powers in some communities as they were seen as highly as the king of chief. An example can be seen from the excavation in Great Lakes, Eastern Africa at the royal tomb of King Rugira, where two iron anvils were place at his head, suggesting importance and powerful significance (Childs et al. 2005, 288). According to some cultures, there are myths built up around the iron sme lter who emphasized their god like significance. As iron production developed widely across the African continent, it had significantly influenced the social rites in terms of beliefs and, particularly, rituals. The process of smelting was often done in isolation, away from the rest of the community. Ironworkers were ritually experts in encouraging good productions and to warn off bad spirits with songs and prayers, giving medicines as well as making sacrifices. The latter are often put in or buried underneath the furnace. An example of this can be seen during the early Iron Age in Tanzania and Rwanda (Schmidt 1997). Some cultures had used iron production as sexual symbolism. Smelting is suggested to be integrated with the fertility of the society, similar to the natural reproduction, production of bloom represented birth and conception. Many strict taboos were known to surround the process. Smelting processes were entirely carried out away from the village by the men. As for the women, any activities of touching of the materials or simply just being present could risk successful production. Having the men away from the fertile women had been suggested to have reduced the temptations which could otherwise depreciate the smelts productivity. The furnaces are often exaggeratedly decorated to represent an image of a woman, or the mother of the bloom (Collett 1993, 507). According to the late C. S. Smith (Smith 1981), the founder of historical metallurgy, has always insisted on the fact that metallurgy is above all an intellectual and social activity (Childs and Killick 1993, 33). The African community had used metals and various other materials such as glass, cloth and wood to express their views of the structure of nature and society, in ways as complex and diverse as the beliefs themselves; even the technology of smelting, constrained as it is by the invariant laws of thermodynamics, offers ample scope for the expression of beliefs about the order of things (Childs and Killick 1993, 33). Numerous African metallurgy scholars have been at the forefront of viewing technology as social process. Technology is not a monolithic force that is somehow separate from people, but is the product of complex ideology, careful negotiations and manipulations, and the vagaries of local resources (Childs and Killick 1993, 33). As a conclusion, African metallurgy, maybe considered to be of important to study because, not only does it include a comprehensive range of study of iron production across the African continent, but it also gives an understanding of how it influenced the aspects of archaeology in Africa. Iron production had given birth to extraordinary diversity in Africa which then had created advanced farming methods through tools, deadly warfare and trading of valuable items; and then on influenced the life of the Africans socially, culturally and politically. (2, 791 words)

Nursing Diagnosis Essay

Answer Key – Review Questions and Rationales 1. Answer: P, acute pain; E, related to incisional trauma; S, evidenced by pain reported at 7, with guarding, and restricted turning and positioning. The PES format stands for: P (problem), E (etiology or related factor), and S (symptoms or defining characteristics). 2. Answer: 1, 4. Answer 1 is stated correctly, with the related factor being the patient’s response to a health problem. Answer 4, risk for infection, is a risk factor for an at-risk diagnosis. In all cases the related factor or risk factor is a condition for which the nurse can implement preventive measures. Answer 2 is incorrect since chronic emphysema is a medical diagnosis. Answer 3 is not a NANDA-I–approved nursing diagnosis. 3. Answer: 3. In the review of data, the nurse compares defining characteristics for the two nursing diagnoses and selects one based on the interpretation of data. Making a diagnostic statement is incorrect because the nurse has not included a related factor. Read more:  How to write a diagnostic essay. 4. Answer: 3. A patient’s readiness for enhanced communication is an example of a health-promotion diagnosis because it implies the patient’s motivation and desire to strengthen his health. 5. Answer: 3, 4. In answer 3 the nurse fails to validate her assessment findings of edema, either by using a scale to measure the severity or by asking a colleague to validate her findings. In answer 4 the nurse prematurely closes clustering, which can lead to an inaccurate diagnosis. In answer 1 the nurse validates  findings to make an accurate diagnosis. In answer 2 the nurse interprets cue clusters to make an accurate diagnosis. 6. Answer: 4. In this example intestinal colitis is a medical diagnosis and thus an incorrect diagnostic statement. 7. Answer: 2, 3, 4, 1. 8. Answer: 1 a, 2 b and d, 3 e, 4 c. Choice a is an example of lack of skill, an error in collecting data. Choice b is an example of using an insufficient number of cues, an error in interpretation. Choice c is an example of not accurately identifying the problem, a labeling error. Choice d is an example of not incorporating cultural information into the diagnostic process, an error in interpretation. Choice e is an example of incorrect clustering, a clustering error. 9. Answer: 1, 2, 4. Diagnosis 1 uses a medical diagnosis as a related factor. Diagnosis 2 uses a clinical sign rather than a treatable etiology such as â€Å"excess noise in environment.† Diagnosis 4 uses a diagnostic study as the etiology. None of the etiologies can be managed or treated by nursing intervention. 10. Answer: 2, 4, 5. The presence of abdominal pain, distention, and a change in bowel elimination pattern forms a cluster, suggesting an elimination problem. 11. Answer: The best way to understand the answer to this question is to have a list of NANDA-I nursing diagnoses and their defining characteristics. For example, the nursing diagnosis of constipation is a possible choice. Examples of additional defining characteristics for which the nurse might assess include checking the quality of bowel sounds, palpating the abdomen for a possible mass, observing the character of any stool that is passed, asking the patient if she is passing flatus. 12. Answer: 2, 3, 5. Pacing, getting lost, and hyperactivity are a cluster of defining characteristics that point to the diagnostic label of wandering. 13. Answer: 2, 3. Hemorrhage and wound infection are collaborative problems, actual or potential physiological complications. Nurses typically monitor for these to detect changes in a patient’s status. Nausea and fear are both NANDA-I approved nursing diagnoses. 14. Answer: 3. Answer 3 is an accurate NANDA-I approved nursing diagnosis with an appropriate etiology. Answer 1 is a goal with an etiologic factor. Answer 2 is a goal with a diagnostic statement. Answer 4 is a nursing diagnostic label with a clinical sign. 15. Answer: 1. A risk diagnosis does not have defining characteristics, but instead risk factors. Risk factors are the environmental, physiological, psychological, genetic, or chemical elements that place a person at risk for a health problem.

The Number One Question You Must Ask for Easy Argumentative Essay Topics about Health

The Number One Question You Must Ask for Easy Argumentative Essay Topics about Health A Secret Weapon for Easy Argumentative Essay Topics about Health Care ought to be taken that the data utilized in the essay is related to the topic. Health is such a gigantic topic, it can be difficult to decide what you wish to write about. Topics cover a wide selection of current events, together with history, ethics and sociology. The degree of health among the population is a substantial factor predetermining the maturation of the whole nation. The problem is there are so many individuals that are still smoking. Choose from popular topics that folks are passionate about. Several aspects, the salary being probably the most essential one, motivate a great deal of young individuals to select a career in healthcare. There's no need in making a determination, which health problem or phenomena is more urgent right now or what's left in the shadows and should be enlightened at least in your essay. The second thing that you ought to take care of once you choose the title is to maintain in mind five forms of argument claims. If it puts an issue for all involved. The issue is that everybody's interpretation of what makes a great society differs. The Easy Argumentative Essay Topics about Health Cover Up Understanding how to compose a strong argumentative paper can help you advance your very own argumentative thinking. You have tons of things to chat about in your essay! When you're picking your topic, remember that it's much simpler to write about something which you currently have interest ineven in case you don't know a good deal about it. The modern society has embraced mobile phones in a large way but it has arrived at a price tag. Up in Arms About Easy Argumentative Essay Topics about Heal th? You don't need to acquire super technical with legal argumentative essays, but don't forget to do your homework on what the recent laws about your preferred topic actually say. The first thing which one has to do is to rate the topic. It is quite easy to discover such a topic and also write this kind of essay as long as you observe a few essential rules. You will be assigned a topic, or your professor will allow you to select your own. Also, introductions ought to be relevant to your healthcare essay topics to help you keep on track by offering the ideal answer. Before concluding the essay, it is important to summarise with a strong emphasis on the subject. As tempting as it might appear to skip past the extra info and go right to the list of persuasive essay topics, don't do it. If you decide on boring, bland or irrelevant topics, you won't have an extremely prosperous paper. Ok, I Think I Understand Easy Argumentative Essay Topics about Health, Now Tell Me About Easy Argumentative Essay Topics about Health! In fact, academic papers can come to be not simply a simple homework but in addition real argumentative masterpieces. It's thus crucial for students to go through medical school essays examples to obtain a concept of what it is that they are anticipated to do. To compose a strong argumentative essay, students should start by familiarizing themselves with a number of the common, and frequently conflictin g, positions on the research topic so they can write an educated paper. Not only that but they will be able to access their online courses and be able to follow the lecture through powerpoints. To write a great argumentative essay, there are four main pieces of the essay you're likely to have to know about. There are several steps which you should take so as to compose an outstanding essay. If you're new to writing argumentative essays, there are a couple of crucial factors which you can learn that could help you compose a greater argumentative essay. Locating good essay topics you might discuss effectively and create powerful argumentative essays is a challenging work. The Unusual Secret of Easy Argumentative Essay Topics about Health Your paper must include a wholly one-sided conclusion stating your own stance is good while that of your opponent is entirely bad. When it has to do with writing an argumentative essay, the main matter to do is to select a topic and an argument that you may really get behind. You first have to pick a good topic with an argument, credible information to strengthen your viewpoint, a good stance on your side, and a fantastic counter-argu ment to assist you sound less biased. When the topic was decided, is critical to come up with an argument surrounding the exact same. The End of Easy Argumentative Essay Topics about Health Every time you demand quick assistance by means of your task, contact on-line expert writing service that may prepare an argumentative essay on this issue you want. Preferably, it needs to be something which you're an expert in. There are a lot of things to argue when it has to do with the law. An argumentative essay example will reveal the should possess some important components which make it better in the practice of convincing. What the In-Crowd Won't Tell You About Easy Argumentative Essay Topics about Health Even though there are many of a fantastic introduction in education. To understand why it's important to define both terms. An excellent topic can help you discover the field in the most efficient way and show your research abilities. The role of assigning an essay to middle school students is to make awareness and permit them to develop writing skills.

Marketing Analysis Old Spice Commercial Essay - 1150 Words

Abstract This paper will analyze the claims made by Old Spice in a commercial selling their line of body washes for men. It will break down each claim and the support behind those claims as well as the warrants and assumptions tied to both. It will consider each of Aristotle’s three appeals individually and consider Old Spices intentions and use of each in the advertisement in question. Lastly, it will observe for potential logical fallacies with consideration to the implications this ad has towards consumerism. Old Spice Commercial Analysis Introduction â€Å"Advertising is the art of arresting the human intelligence just long enough to get money from it.† (Shah, 2012) The goal of advertising is to capture their target audience’s attention and to create something memorable to sell their product. One advertisement campaign that has managed to do this quite well is Old Spice a men’s body wash brand that is among the top competitors. Successful advertisement is what creates a brand, even if you have a great product without good advertisement a product cannot be successful. In the advertisement campaign for Old Spice Men’s body wash the advertiser uses sexual appeal geared toward the female demographic, and the use of false cause to play on men’s insecurities of to convince viewers to buy their product. Toumin Method Claims and Evidence The Advertisement has a clear claim, by using this product you can look, smell, and be just like the actor on your televisionShow MoreRelatedEssay on Pre-campaign Analysis: Old Spice Brand Image1560 Words   |  7 PagesPre-campaign Analysis Research Research is a crucial step in determining the problem or issue faced by the organisation (Gregory, 2000). Old Spice conducted their research and found that the brand’s image was fading away along with their sales at the start of 2010 (Rowe, n.d.). The image that the public had in mind was that Old Spice’s products were something their â€Å"grandfathers† would buy and use (Effie Awards, 2011). Sales had dropped due to the increased number of competitors for bodyRead MoreBusiness: Axe Commercial Research Essays1132 Words   |  5 Pagesantiperspirant stick, aftershaves and eau de toilette, and skin care products (slideshare.net). Commercial Campaigns Besides new products and packing, the Axe brand has its own communications campaign annually for over 15 years, and part of Axe brand’s promotions are through mass media. Due to its successful advertisements, Unilever (AXE) recently became the 2013 winner of the Global Marketing (marketingsociety.com). The elements which were included in these years was diversiform;Read MoreRhetorical Analysis of an Ad Essay1919 Words   |  8 PagesOld Spice Rhetorical Analysis Old Spice is very blatant in the way they attract their customers. An obvious example is The Man Your Man Could Smell Like commercial. In this advertisement Old Spice envisions their audience to be anyone who is in a relationship or trying to be in relationship. The more obvious targeted audience is the female audience. To attract the female audience they put an attractive man in the commercials and try to make it seem that if their â€Å"man† uses old spice body washesRead MoreSocial Media And Its Impact On Society1306 Words   |  6 Pagesbe equivalent to an interactive television commercial; the sites would provide education to consumers in hopes of generating revenue. After companies established their own websites, new types of social media were introduced: MySpace, Facebook, YouTube, Twitter, and LinkedIn. Businesses saw opportunities to utilize these new forms of social media and immediately took advantage by increasing brand awareness and customer engagement, using market analysis, improving recruiting efforts, and generatingRead MoreOld Spice Ad Analysis1891 Words   |  8 PagesDecember 11, 2012 Comp I Advertisement Analysis Advertisements come in various shapes, sizes, and mediums, and as humans, we are constantly surrounded by them. Whether they are on TV, radio, or in a magazine, there is no way that we can escape them. They all have their target audience for whom the advertisers have specifically designed the ad. When a company produces a commercial, their main objective is to get their product to sell. This is a multibillion-dollar industry and the advertisersRead MoreJack Link’s Beef Jerky Going Hip and Healthy Essay1280 Words   |  6 Pagescompany has been forced to tailor its marketing towards an ever-changing population that now values nutritional value as well as visual appeal, economical value, and of course, taste. Analysis Beef Jerky snacks are subject to public stereotypes such as they are boring, not cool, eaten primarily by men, and not good for you. (Hawkins, Mothersbaugh, 2010) The Jack Link’s Company however is striving to overcome these stereotypes by advancing an aggressive marketing campaign geared toward unlikely audiences;Read MoreAnalysis of Erving Goffman ´s Gender Advertisements Essay examples2152 Words   |  9 PagesIn this analysis, the author examines the staging of male and female subjects in visual discourse by deconstructing advertisements that involve gendered subjects, examine gender on an institutional level, and look at gender as a performance. Advertisements are the most conventional ways to portray commercial realism, something that could be real because they don’t look peculiar or weird- they look normal. The big question asked by Erving Goffman, author of the book, â€Å"Gender Advertisements† is whyRead MoreMarketing Term Report on Shan2105 Words à ‚  |  9 PagesMARKETING TERM REPORT BY KHAN AKHTER RUMMAN SHAN FOODS ABOUT THE COMPANY: Shan Foods came into existence in 1981 when it began operations from a single room as it was Shan Masala back then, launched full range of spices to cater to local public,due to its popularity Shan started exporting after a few years due to increased international popularity. But after sometime, the need to reposition the brand was felt. It needed to be repositioned as a food brand rather than a spice brand. Re-imaging theRead MoreA Debate on Brand Viability3055 Words   |  12 Pages 2012). Some products or services that people use become a tradition something that they always buy when celebrating or the one person they rely on to make things right. There is the tailor who fits all the suits of the men in the family young and old who is so special to the family (almost, it seems, like a family member) that they wouldnt consider taking their alterations or new attire to anyone else. Interestingly, Channel No. 5 is that kind of legendary product. Hingston wrote that Channel NoRead Mo reConsumer Purchase Decision2355 Words   |  10 Pagestheir products and services effectively (Singh and Kaur, 2011). Tools such as marketing and advertising are used extensively for persuasion and its effectiveness and success can be judged on the extent to which the message is perceived and interpreted by the target market. Singh and Kaur (2011) showed that the impact of marketing and advertising activities is extremely important and sensitive in terms of society and marketing organisations. They studied that advertising plays a vital impact on consumer